Inhibitors

Description: Acid Inhibitor is specifically formulated for the prevention of environmental acid attack on metal components without hampering the acidic effect or in some occasions even enhancing the acid effect in the given process or application, are of the following various types Hydrochloric acid inhibitor, sulfuric acid inhibitor, sulfamic acid inhibitor, citric acid inhibitor etc. The type and concentration of the Acid Inhibitor required is determined by the type of metal to be protected and the conditions under which the metal is to be treated. Steel, aluminum, iron, titanium, etc., will all require alloy specific acid inhibitor formulations of corrosion preventative coatings for the best end result. We, at Chemtex Speciality Limited, maintain a proper blend ratio and homogeneous solution during the treatment so as to ensure the most effective and long lasting protection for the specified metal.

Key Features & Benefits

• Forms a protective coating over metal surface to prevent corrosion • Does not affect metallic attributes • Well effective even at high temperature • Capable of inhibiting all types of acid corrosion • Chlorine free • Easily soluble with all acid concentrations

Chemtex Corrosion Inhibitor is a concentrated liquid designed to inhibit corrosion during acidizing. It contains alkoxylate fatty polyamines, Butanol, formaldehyde, and an antifoaming agent to provide corrosion protection in hydrochloric acid on various metals such as copper, brass, and nickel, tin, lead, zinc, stainless steel, and galvanized surfaces. Our non-foaming inhibitors are used for cleaning out steam generation equipment like pulp digestors, boilers and various other metalworking processes.

Key Features & Benefits

·         Excellent wetting efficiency

·         Impeccable fume control

·         Superior temperature & acid stability

·         Highly effective.

Acid Inhibitor for mineral and organic acids helps in effective inhibition of hydrochloric, phosphoric, formic acid, sulfuric, acetic, citric, oxalic, sulfamic, bisulfate, tartaric and other organic acids on metal surfaces, preventing corrosion.It is a liquid inhibitor designed specifically for use in industrial cleaning operations to prevent acid attack on mild steel, stainless steel and copper or brass.

• Modifies metal surface to prevent corrosion


• Easy to use


• Excellent wetting properties for better cleaning


• Effective fume suppression


• Saves Zinc in galvanizing (Plating)


• Reduces metal loss


• Enriches strength of pickling acid bath, and reduces acid consumption

Sulfamic Acid Inhibitor, a chemical superlatively utilized for descaling the impact of sulfamic acid over heat transfer surfaces, is made with superior qualitative corrosion inhibitors and wetting agents to helps in ensuring excellent cleaning of the plate exchanger. It is easy to use, bears excellent wetting attributes for enhanced cleaning and cost effective.

• Easy-to-use
• Excellent wetting attributes
• cost effective
• Self foaming acid corrosion inhibitor

Chemtex’s Cooling Tower Antiscalant And Corrosion Inhibitor is a highly effective blend of designed to control scale, corrosion and non-biological fouling in cooling water systems. It does not contain chromate, zinc or heavy metals. It is specially created to meet the needs of systems, containing high concentration of hardness salts. Chemtex’s Cooling Tower Antiscalant And Corrosion Inhibitor helps to keep the system surfaces clean and deposit free. It provides superior protection to system metallurgy under a variety of conditions.

Chemtex’s Cooling Tower Antiscalant And Corrosion Inhibitor is purely organic and biodegradable, thus does not promote heavy metal discharge in blow down.

Key Features & Benefits

• Designed with all organic chemicals


• Complete single treatment for prevention of non-biological fouling


• Excellent corrosion inhibition for all metals


• Can retain higher levels of hardness in the water & holds blow down to a minimum


• Keeps heat transfer surfaces clean and permits maximum heat exchange efficiency


• Excellent control of calcium phosphate sludge and iron fouling


• No disposal problem (contains no chromate, zinc or heavy metal)


• Effectively inhibits deposition of calcium and silicate salts (silica up to 50ppm)


• Eliminates or reduces acid dosing for pH control


• Effective over a wide pH and temperature range


• Easier handling, being a liquid product

Zinc Phosphonate Based Scale And Corrosion Inhibitor is a superior blend of organic products designed to control scale, corrosion, and non-biological fouling in cooling water systems. It is specially created to meet the needs of systems, containing a high concentration of hardness salts. An effective organic corrosion inhibitor used in an acidic and aggressive environment can form an adsorption film on the surface of a metal, slowing down the diffusion of ions and inhibiting the occurrence of metal corrosion. this formulation meets extreme corrosion challenges for low and middle-range temperature oil and gas extraction sites and downhole operations. Depending on the conditions, operating limitations, and specific applications, Imidazoline can be formulated as oil-soluble, oil-soluble/water-dispersible, or water-soluble/oil dispersible. Imidazoline manifests corrosion inhibition properties in oil-based and water-based systems (having low acid acetate salts). Its hydrophobic bond prevents any kind of reaction between corrosive elements and metal ions by forming an adsorption layer over the application surface and its hydrophilic bond ensures its stability. The cationic of imidazoline helps it to remove water and foster adhesion in a damp environment.

Key Attributes and Benefits:
• Designed with all organic chemicals
• Complete single treatment for prevention of non-biological fouling
• Excellent corrosion inhibition for all metals
• Can retain higher levels of hardness in the water & holds blow down to a minimum
• Keeps heat transfer surfaces clean and permits maximum heat exchange efficiency
• Excellent control of calcium phosphate sludge and iron fouling
• No disposal problem (contains no chromate, zinc or heavy metal)
• Effective over a wide pH and temperature range

Our formulation is used to formulate corrosion inhibitors for oilfield and refinery use. It provides corrosion protection to metallic installation and pipelines against harmful corrosive gases that come out during the crude extraction process. Oil and gas transmission lines are effectively protected against corrosion using our organic corrosion inhibitors which form an adsorption layer on the surface.

Key Features & Benefits

• Offers a unique and specific focus on the oil and gas industries. • Significant reduction in sour gas corrosion (Carbon Oxides, Hydrogen Sulphide, Dissolved Oxygen) • Effective over a wide range of temperature • Provides protection to even physically inaccessible internals • Does not form emulsion • Film forming nature

Acid Corrosion Inhibitor developed by Chemtex Speciality Limited is a substance, that effectively reduces the corrosion rate of a metal exposed to that environment. It has been uniquely formulated for preventing all types of acidic attack on the metallic surface in various industrial process and applications, degrading its strength as well as its properties. Acid Corrosion Inhibitor generally helps to impede corrosion by adhering to the metal surfaces and forms protective films which serves to prevent both cathodic and anodic reactions.

Key Features and Benefits:

• Effectively prevents acidic attack on metal surface
• Cost effective dosage
• Does not alter the properties of metal

Crude line corrosion Inhibitor is specifically formulated for oil lines,providing protection from corrosive gases such as Carbon dioxide, Hydrogen sulfide. This product is effective in crude oil pipelines and crude wells. These formulations are well known for its thermal stability and are compatible with other water injection chemicals.

Key Features & Benefits

• Effective in both fresh and brine water • Offers excellent protection in sweet and sour systems • Readily partitions into the water phase • Effectively treats high water-to-oil ratio wells

CHEMTEX'S Mono Ethylene Glycol Corrosion Inhibitor is a specially formulated chemical additive for Mono Ethylene Glycol to protect system metals from corrosion. It is a multi-metal corrosion inhibitor and prevents corrosion in multi-ways. 
CHEMTEX'S Mono Ethylene Glycol Corrosion Inhibitor modifies metal surface by absorption and making it less susceptible to corrosion. It buffers the organic acids formed as a result of glycol oxidation and prevents further formation of acids. CHEMTEX'S Mono Ethylene Glycol Corrosion Inhibitor protects the metal surface from corrosion without reducing the system heat transfer efficiency.

Key Features & Benefits

• Extends System Metal Life
• Saves Power And Increases Heat Transfer Efficiency
• Increases Life Of Glycol By Avoiding Degradation
• Does Not Affect Freeze Protection Properties
• Does Not Form Sludge Deposit In The System
• Avoids Leakage And Minimizes Maintenance Jobs

Scale Inhibitor based on phosphonate is a unique chemical formulation that helps in maintaining the machinery parts used in drilling pipelines and production systems. This chemical inhibits the formation of scale forming compounds that tend to get deposited at production well and sites and on surface equipment. These compounds if not inhibited at proper time can form scales which will reduce the flow rate of the fluid in the pipelines and storage tanks, resulting in system breakdown.

Key Features & Benefits

·         Reduce downtime for mechanical, acid, and/or chemical cleanout;

·         Increase lifetime of well and well equipment by minimizing deposits that can cause excessive wear;

·         Maintain flow capacity of various flow lines associated with surface equipment; and

·         Polymer-type scale inhibitor traceable with a simple field test.